|Battery||18350 1400mAh*1 PC|
|Exceed Protected Current||2A|
|Working Current||280mA ~ 3000mA|
|Controllable Precision of Angle||0.01°|
|Action Camera Compatibility||GoPro Hero 7/6/5/4/3，YI, SJCAM,|
and other action camera with similar size
（Supported size：height up to 44.5mm，thickness up to 27mm）
|Main Work Mode||1.Pan Following (Default)|
2.Pan & Tilt Following
|APP Fuctions||Virtual Remote Controller|
|Working Modes Change|
|Personal Specs. Setting|
|Online Firmware Upgrade|
|Extension Screw Holes||1/4 Extension Screw Hole|
|Standard Accessories||Tripod，Carry case，USB cable for gimbal|
- XG1 APP “Hohem Gimset” support mobile devices with ios 9.0 or above and Android 4.3 or above.
- Please make sure the bluetooth of smartphone is available and enabled.
- When intalling the app”Hohem Gimset”,please make sure all the permission are allowed before accessing the APP at the first time.
1. Please check if the power button is defective.
2. Please check if your gimbal is fully charged.
1. Make sure your action camera is mounted correctly and firmly on the gimbal. It is able to set the pitch motor both on the left and right side, which is based on your action camera design and weight.
2. Make sure the action camera is horizontal well balanced before powering on the gimbal.
3. XG1 is compatible with most of action cameras, it would need to adjust its motor torsion for some lightweight action camera in the APP to avoid vibration.
- XG1 is able to upgrade the firmware by connecting computer with Hohem Gimbal Tool, please download the firmware upgrade guide for details.
- Please check if the charger and charging cable is defective.